我们使用 Cookie 及类似的网络技术来识别您对网站的再次访问和偏好,并进行流量分析。要了解有关 Cookie 的更多信息,包括禁用步骤,请查看我们的隐私政策.单击此横标上的“我接受”,即表示您同意使用 Cookie,除非您将其禁用。

A flat view of an empty sandpitA flat view of an empty sandpit

Off-Highway Drives Arctis Two-Speed Fan Drives

Arctis Two-Speed Fan Drive -- Horton fan clutch

Arctis Two-Speed Fan Drives offer a better, more efficient cooling solution for on- and off-highway vehicles without ram air. Rigorously tested, Arctis Two-Speed Fan Drives are engineered for reliability and long operating life in the highest-heat under-hood conditions.

The Arctis Two-Speed alternates between eddy current and spring-actuated cooling for precise, highly efficient temperature control and superior horsepower performance. Under most operating conditions, the Arctis Two-Speed Fan Drives are powered by eddy current—turning the fan at a lower speed. When additional cooling is needed, the Arctis Two-Speed spring actuates and runs the fan at full input speed.

应用

  • On- and off-highway equipment with little to no ram air

规格

Actuation
Eddy current at low speed with spring lockup
Minimum air pressure to disengage
620.5 kPa [90 psi]
Out-of-box torque
305 N-m [2,700 in-lbs.]
Friction disc diameter
200.6 mm [7.9"]
Fan blade capacity (diameter)
Application specific
Engine horsepower range
186 - 447 kW [250 – 600 HP]
Friction liner wear limit, minimum thickness
5.76 mm [0.23"]

特点与优势

  • ECM control allows precision cooling of hotter running, emissions reduced engines
  • Up to 80% reduction in fan engagement cycles for reduces noise, conserves fuel and increase available horsepower
  • Less slip at engagement and premium bearing provide longer friction liner life, increased reliability and long life
  • Easy installation and maintenance
  • Design allows faster engine warm-ups in cold weather for operational efficiency
  • Ability to drive larger fans at higher ratios for a range of applications

Contact Horton

必填项

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Recommended Fans

MS9 Nylon Engine Cooling FanMS9 Nylon Engine Cooling Fan

MS9 Nylon Fan

Unique blade shape, 9-blade design for increased airflow and efficiency. Available diameter range: 560 – 762 mm [22” – 30”]

产品细节